Replace ISP ONT/ONU – LEOX LXT-010S-H SFP GPON Module

In this video, I will replace the ISP provided ONT/ONU with the LEOX LXT-010S-H GPON SFP module. The LEOX LXT-010S-H is coming from LeoLabs, a company founded by South Poland ISP – Leon. It is powered by the Realtek RTL9601CI chipset and supports most of the popular OLTs, including Huawei, Dasan, ZTE, Zhone, Calix E7, Nokia/Alcatel-Lucent, Ericsson BLM1500, etc.

You can place an order directly from LeoLabs – [email protected]

Below is some information of the setup:

ISP: Viettel
OLT: ZTE
ONT/ONU: Dasan H646GM-V
GPON SFP: LEOX LXT-010S-H (supports 1/2.5G GPON)
Media Converter: JUPLINK 2.5GbE
Router: NanoPi R6S (2.5GbE)

In other to replace the ISP provided ONT/ONU, we should clone (copy the information of the original device) to the new SFP/ONT so that it will report the same information to the OLT, to get authenticated. The information is vary, but basically it will be GPON Serial Number, ONU Model, PON Vendor ID, Hardware Version, Software Version and MAC Address.

You can check out my previous videos to learn more:
https://youtu.be/3g6mRDfUppQ
https://youtu.be/yD8aq4KSWko
https://youtu.be/ZI2U8wnJ4IQ
https://youtu.be/ib0XVeCJanM

LEOX LXT-010S-H home page: https://bit.ly/47kMrCg
LXT-010S-H User Guide: https://hack-gpon.org/ont-leox-lxt-010s-h/
Other resources: https://github.com/Anime4000/RTL960x

Timeframe:
00:00 – Intro
00:56 – Who is LeoLabs?
01:31 – The LEOX LXT-010S-H GPON SFP Module
01:59 – Current Setup (ISP provided ONT) Overview & Speedtest
05:43 – What information to clone (to the new GPON ONT/SFP)
06:51 – New Hardware Installation (LEOX LXT-010S-H, 2.5G Media Converter)
07:33 – Access the LXT-010S-H Web-UI (with OpenWrt)
10:33 – Configure the LXT-010S-H with Telnet (Must watch)
13:00 – Speedtest – Up to 2 Gbps Throughput
14:45 – Don’t use OpenWrt? Only have SFP + Media Converter

Thanks for watching and see you in the next update! .