Victron VenusOS | Easiest Install possible | Raspberry Pi 4B | NO Cerbo GX or Venus GX

Finally, I got a Raspberry Pi 4 B. I want to show you the easiest possible way to install the latest Victron VenusOS on the Raspberry Pi 4B! This took me probably about 30 min! We will start from scratch and to all steps together! And there is only one time the Terminal needed to enter some commands!

Victron VRM Portal: https://vrm.victronenergy.com/
Victron Professional: https://professional.victronenergy.com/

Victron VenusOS Images: https://updates.victronenergy.com/feeds/venus/release/images/raspberrypi4/

SetupHelper Package: https://github.com/kwindrem/SetupHelper

Commands:
Install setupHelper:
1. wget -qO – https://github.com/kwindrem/SetupHelper/archive/latest.tar.gz | tar -xzf – -C /data
2. mv /data/SetupHelper-latest /data/SetupHelper
3. /data/SetupHelper/setup

RpiDisplaySetup:
1. /data/RpiDisplaySetup/setup

Affiliate links:

Raspberry Pi 4 B (4GB) Kit
https://amzn.to/3qNywns

Raspberry Pi 4 Passive Cooling Housing
https://amzn.to/3JiMX9p

Raspberry Pi 3 Model B+ Starter Kit
https://amzn.to/3Lb3Tig

UCTRONICS for Raspberry Pi Screen 7 Inch IPS Touchscreen
https://amzn.to/3Nfx4Sc

SanDisk Extreme Pro 64GB
https://amzn.to/446fqXX

Timecodes
00:00 – Intro
01:47 – Step 1: Get a Raspberryi Pi 4B
03:08 – Second Step 1: Download the VenusOS Image
07:23 – Bluetooth and WIFI connection
12:59 – Date/Time and Firmware check
14:25 – Make it easy and install SetupHelper
14:54 – Enable SSH
16:29 – Install SetupHelper
18:47 – Install RpiDisplaySetup and RpiTemperature
24:02 – Touchscreen Calibration
27:05 – Connect VRM Portal
29:43 – This is so cool! DARKMODE!
30:50 – Outro