GPON OLT Configuration Untag | GPON OLT Config UNTAG Trunk Method | TES7008 V1 GPON OLT | iTinfo

CDATA GPON OLT Config as a Uplink Untag and all PON Ports Trunk on VLAN 200. We will config Tenda GPON OLT on Putty command line. you can easily config this OLT by watching my video. We will create service profile , line profile as well then allow these profile on every ONT. you can use Tenda ONT for better performance.
Tenda GPON OLT “TES7008” is 1U rack-mounted device with1 USB interface, 4 uplink GE ports, 4 uplink optical ports, 2 10-gigabit uplink ports and 8 GPON ports, each GPON port supports the splitting ratio of 1:128 and provides downstream bandwidth of 2.5Gbps and upstream bandwidth of 1.25Gbps,system support 1024 GPON terminals accessing in for the most .
You can easily config Tenda Gpon OLT TES7008.
Just copy and paste bellow commands on Terminal.
*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈
enable
config
ont-lineprofile gpon profile-id 1 profile-name “lineprofile_1”
#tcont 0 dba-profile-id 0
tcont 1 dba-profile-id 1
gem add 1 tcont 1 encrypt off
gem mapping 1 1 vlan transparent
commit
exit
!
interface gpon 0/0
ont autofind all enable
ont authmode all manual
ont policy-auth all enable
exit
!
ont policy-auth enable
ont policy-auth policy all ont-lineprofile-id 1 ont-srvprofile-id 0
vlan 2-4094
!
*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈
..
Thanks for watching my video.
~𝐃𝐨𝐧’𝐭 𝐅𝐨𝐫𝐠𝐞𝐭 𝐭𝐨 𝐒𝐮𝐛𝐬𝐜𝐫𝐢𝐛𝐞 𝐦𝐲 𝐜𝐡𝐚𝐧𝐧𝐞𝐥 “𝐢𝐓 𝐈𝐧𝐟𝐨”~
You can 𝐂𝐨𝐧𝐭𝐚𝐜𝐭 𝐮𝐬 𝐨𝐧 𝐖𝐡𝐚𝐭𝐬𝐀𝐩𝐩 for paid Services.
*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈
https://wa.link/en8xn4
*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈*᷈

Tenda OLT Untag Config, Cadat OLT Untag Config. .