Replace ISP ONT/ONU – NOKIA GPON SFP G-010S-A (OpenWrt SFP 7.5.3)

In this video, I will replace the ISP provided ONT/ONU with the Nokia GPON SFP G-010S-A. This SFP module is running a modified version of OpenWRT 7.5.3 as can be seen from the LuCI web interface.

Some of the background information:
ISP: VNPT (Viettel, GPON)
OLT: Alcatel Lucent (ALU)
ONT/ONU: iGate GW040-H
Media Converter: JUPLINK 2.5GbE (both SFP & RJ45 support 1G and 2.5G)
Router: NanoPi R6S (2.5GbE)
Link to the post: https://vantc.net/nokia-gpon-sfp-ont-g-010s-a.html (updating)

To learn more about OLT (Optical Line Termination) and ONT (Optical Network Terminal) and how to replace the ONT/ONU with an GPON SFP module or third-party ONT, you can check out this video: https://youtu.be/yD8aq4KSWko

Helpful resources:

– About the Nokia G-010S-A: https://github.com/hwti/G-010S-A
– RTL960x GPON SFP (Should see): https://github.com/Anime4000/RTL960x

Video timeframe:

00:00 – Replace ISP-provided ONT iGate GW040-H with Nokia G-010S-A
02:16 – Connect Fiber cable to Nokia G-010S-A and Media Converter
03:42 – Connect Media Converter to PC and configure Static IP
05:04 – Access the LuCI web interface & Change language
06:51 – Overview of the Nokia G-010S-A LuCI web interface
08:10 – The GPON Tab
09:01 – Configure the Nokia G-010S-A (Clone information from ISP ONT)
13:55 – Connect Media Converter to NanoPi R6S
14:33 – Setup PPPoE connection of NanoPi R6S
17:25 – PPPoE Connection Failed & Troubleshooting
19:06 – Restore the GPON OMCID to default (software version)
19:21 – Enable Interoperability Mode (GPON)
21:13 – The PPPoE is up …Let’s run Speedtest
23:49 – SSH Access to the Nokia G-010S-A
25:32 – Speedtest & GPON SFP CPU Usage
26:48 – Conclusion (Must see)
27:55 – Where to buy this Nokia GPON SFP G-010S-A

If you enjoy the video and want to support me, please check out the patreon page at https://www.patreon.com/vantechcorner.
Thanks for watching and see you in the next video! .