AdoPiSoft | VLAN Config
(This will work on PC, RPI or Orange pi)
Materials/Devices used:
1. TPlink switch model TL-SG108PE
2. Orange Pi
3. Tenda router
TPLink config: https://drive.google.com/file/d/1qCnIQs-x_yHLbpFNEVh26iHHSmERok9s/view?usp=sharing
When you configure the switch, connect your PC to any of the ports on the switch. Then set your PC IP to static
IP: 192.168.0.10
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.1
In this tutorial we only create 1 vlan for port 1 to 6, but you can add multiple vlans if you want. Like for example 3 Vlans:
VLAN ID: 22 for port 1 and 2
VLAN ID: 33 for port 3 and 4
VLAN ID: 44 for port 5 and 6 .
Comments are closed.